Using Finite Element Method for Stress-Strain Evaluation of Commonly Used Buried Pipelines in Fault

In different kinds of buried pipelines, L245 and L360 are the most used which are chosen by the China Pipeline Design Institute. For studying the stress and deformation characteristics of buried pipelines with different specifications across faults, this paper established a physical model of cross-fault buried pipelines and a finite element model of pipelines crossing the fault zone, which adopts the finite element method and ANSYS software. The models take pipeline material, soil material, grid division, load application method, and other factors into consideration, concentrating on the nonlinear solution of L245 and L360 buried pipelines under the condition of strike-slip fault soil. The results illustrate that pipelines with larger diameters are more conducive to resisting the stress and deformation caused by faults. Moreover, the strain and dislocation amount of the pipeline increases with the increase of the dislocation amount when a fault occurs. Furthermore, the resistance is optimal when the angle of intersection between the fault and the pipe is 60, while further research and analysis are needed for special cases. This work can provide a direction for the optimization of parameters for pipeline design especially strain-based design.