Estimation of Heat Source Model’s Parameters for GMAW with Non-linear Global Optimization—Part I: Application of Multi-island Genetic Algorithm

Estimating the thermo-elasto-plastic deformation by arc welding through finite element analysis has been used in various industrial fields. The Goldak heat source model is one of the most important and widely used models in finite element analysis, and its parameters are estimated based on the results of previous studies and tests. Part I of this study focused on the adequate heat source model, and the study for the welding deformation with the moving heat source will be done on the latter research. This study used the parameters of Goldak’s heat source model, weld efficiency, and the location of the heat source as design variables, and defined the Heat Affected Zone (HAZ) boundary line of Bead on Plate (BOP) welding as the target. BOP welding was performed using SS400 plates, the HAZ boundary line was determined based on examining the shape of the cross-section, and the optimization condition was that temperature inside the boundary line exceeded 727 °C while the temperature outside the line did not exceed 727 °C during the welding process. During this process, a multi-island genetic algorithm (non-linear global optimization method) was used to obtain the optimal results out of 1000 candidate groups, in which the HAZ boundary was similar to the experimental results. Applying a global optimization algorithm to determine the parameters of the most important heat source model to analyze welding deformation is significant, and this may be applied in various industrial fields that use welding including shipbuilding, aviation, and machinery industries.