Higher-Order Belief Propagation Correction Decoder for Polar Codes

Belief propagation (BP) decoding for polar codes has been extensively studied because of its inherent parallelism. However, its performance remains inferior to that of successive cancellation list decoding (SCL) due to the structure of the decoding graph. To improve the block error rate (BLER) performance, the BP correction (BPC) decoding, a post-processing scheme that corrects prior knowledge of the identified code bit, improves convergence by executing additional iterations on the failed BP decoder. Moreover, the BPC decoder demonstrates a better decoding performance than the BP-based bit-flipping decoder. Nevertheless, the additional decoding attempts lead to increased latency. In this article, a modified BPC decoder is proposed to reduce the number of decoding attempts by redefining the correction rules. A new metric is designed to effectively identify the corrected location. Numerical results show that the proposed modified BPC decoder achieves a slight improvement in BLER compared with the original BPC, with a dramatic reduction in average complexity. Furthermore, a higher-order version, named MBPC-Ω, is extended to further improve the performance, where the Ω is the maximum correction order. Numerical results show that the higher-order modified BPC achieves a similar BLER performance to existing multiple bit-flipping BP decoders but has around half the latency overhead. In addition, the proposed MBPC-2 decoder performs better than the cyclic redundancy check-aided SCL (CA-SCL) decoder with list size 4 and is slightly worse than the CA-SCL with list size 8 in high signal-to-noise ratio (SNR) regions but with significant decoding latency reduction.