Dynamic study of milling low depth channels

Dynamic study of milling low depth channels

This paper presents a study of dynamic aspects of the milling cutters used in particular case of low depth channels. A new calculation method was developed, taking into account the high variations of cutting forces during milling small depth channels with peripheral cutting tools. A new formula was...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Rosca, Dorin Mircea, Vasiloni, Mircea Anton, Folea, Milena
Format: Tagungsbericht
Sprache:eng
Schlagworte:
Case depth
Channels
Cutters
Cutting parameters
Cutting tools
Dynamic stability
Milling cutters
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper presents a study of dynamic aspects of the milling cutters used in particular case of low depth channels. A new calculation method was developed, taking into account the high variations of cutting forces during milling small depth channels with peripheral cutting tools. A new formula was established for the minimal value of channel depth that allows cutting process to be performed in conditions of dynamic stability.
ISSN:2261-236X
2274-7214
2261-236X
DOI:10.1051/matecconf/20179402013