In situ magnesium calcium phosphate cements formation: From one pot powders precursors synthesis to in vitro investigations

Calcium phosphate cements are of great interest for researchers and their applications in medical practice expanded. Nevertheless, they have a number of drawbacks including the insufficient level of mechanical properties and low degradation rate. Struvite (MgNH4PO4) -based cements, which grew in popularity in recent years, despite their neutral pH and acceptable mechanical performance, release undesirable NH4+ ions during their resorption. This issue could be avoided by replacement of ammonia ions in the cement liquid with sodium, however, such cements have a pH values of 9–10, leading to cytotoxicity. Thus, the main goal of this investigation is to optimize the composition of cements to achieve the combination of desirable properties: neutral pH, sufficient mechanical properties, and the absence of cytotoxicity, applying Na2HPO4-based cement liquid. For this purpose, cement powders precursors in the CaO–MgO–P2O5 system were synthesized by one-pot process in a wide composition range, and their properties were investigated. The optimal performance was observed for the cements with (Ca + Mg)/P ratio of 1.67, which are characterized by newberyite phase formation during setting reaction, pH values close to 7, sufficient compressive strength up to 22 ± 3 MPa (for 20 mol.% of Mg), dense microstructure and adequate matrix properties of the surface. This set of features make those materials promising candidates for medical applications. [Display omitted] •Self-setting magnesium-calcium phosphate cements were synthesized by one-pot processes.•Cement liquid based on NaH2PO4 warrantee the absence of ammonia release in human body.•New regularity between (Ca + Mg)/P ratio and bone cements phase formation with NaH2PO4 were established.•The optimal ratio of (Ca + Mg)/P = 1.67 resulted in neutral pH and sufficient strength.