Research on Melamine-Urea-Formaldehyde/Nano-Al2O3 Composite Foam Thermal Insulation Sealing Materials for Coal Mines

In this study, melamine-urea-formaldehyde/nano-Al2O3 (MUF/nano-Al2O3) composite gel foams were produced by foaming with CO2 generated by CaCO3 and phosphoric acid. Nano-Al2O3 was introduced to the MUF matrix based on the optimum formulation obtained by the response surface methodology based on Box–Behnken design, and the effects of nano-Al2O3 on the cell structure, apparent density, compressive strength, pulverization ratio, thermal stability, and thermal conductivity were investigated. The results revealed that the introduction of nano-Al2O3 could improve the foaming and mechanical properties of MUF with smaller cell sizes, a narrower cell size distribution, decreased apparent density, higher compressive strength, and a decreased pulverization ratio. MUF/nano-Al2O3-1.5 with the most uniform cell size distribution had a 21% increased compressive strength, but its apparent density and pulverization ratio decreased by 10% and 13%, respectively. Although the char yield decreased with the introduction of nano-Al2O3, MUF/nano-Al2O3 composite foams still presented improved thermal stability under 300 °C, with a thermal conductivity of 0.068 W/(m·K) and a limiting oxygen index of more than 30%. Therefore, MUF/nano-Al2O3 composite gel foam could be employed in coal mines as thermal insulation sealing material due to its better cell structure and mechanical properties.