Improving CO2 adsorption efficiency of an amine-modified MOF-808 through the synthesis of its graphene oxide composites

This research developed a novel composite of MOF-NH 2 and graphene oxide (GO) for enhanced CO 2 capture. Employing the response surface methodology-central composite design (RSM-CCD) for experiments design, various MOF-NH 2 /GO samples with GO loadings from 0 to 30 wt% were synthesized. The results of SEM, XRD, EDS, and BET analysis revealed that the materials maintained their MOF crystal structure, confirmed by X-ray diffraction, and exhibited unique texture, high porosity, and oxygen-enriched surface chemistry. The influence of temperature (25–65 °C) and pressure (1–9 bar) on CO 2 adsorption capacity was assessed using a volumetric adsorption system. Optimum conditions were obtained at weight percent of 22.6 wt% GO, temperature of 25 °C, and pressure of 9 bar with maximum adsorption capacity of 303.61 mg/g. The incorporation of amino groups enhanced the CO 2 adsorption capacity. Isotherm and kinetic analyses indicated that Freundlich and Fractional-order models best described CO 2 adsorption behavior. Thermodynamic analysis showed the process was exothermic, spontaneous, and physical, with enthalpy changes of − 16.905 kJ/mol, entropy changes of − 0.030 kJ/mol K, and Gibs changes energy of − 7.904 kJ/mol. Mass transfer diffusion coefficients increased with higher GO loadings. Regenerability tests demonstrated high performance and resilience, with only a 5.79% decrease in efficiency after fifteen cycles. These findings suggest significant potential for these composites in CO 2 capture technologies.