Influence of Specimen Diameter for Titanium Grade 1 on SHPB Tests and Its Verification Using FEM

The split Hopkinson pressure bar (SHPB) is a machine used for obtaining dynamic material properties at high strain rates of 102–104 s−1. In the SHPB test, the material properties obtained vary depending on the shape of the specimen. In other words, it is important to understand the behavior of the s...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Metals (Basel ) 2023-12, Vol.13 (12), p.1941
Hauptverfasser: Kim, Yeon-Bok, Park, ByeongJin, Kim, Jeong
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The split Hopkinson pressure bar (SHPB) is a machine used for obtaining dynamic material properties at high strain rates of 102–104 s−1. In the SHPB test, the material properties obtained vary depending on the shape of the specimen. In other words, it is important to understand the behavior of the specimen when selecting the specimen dimensions. However, specific standards, such as the size of specimens and bars for the SHPB, have not yet been established. This study investigates the effect of changing the specimen diameter on strain and stress results. Comparison and verification with experimental results were performed using the LS-DYNA program. Specimens are cylindrical titanium grade 1. The specifications of bars and length (L) of the specimens were not changed. The results revealed that the reflected ratio increased, and the transmitted ratio decreased as the area of the specimen decreased. The ratios of these strains are affected by impedance (Z=ρAC). The area reduction of specimens under the same conditions made it possible to obtain dynamic properties at a higher strain rate. It was shown that the impedance relationship and strain rate can be altered by varying the diameter of the specimen without changing the dimensions or material of the bar itself.
ISSN:2075-4701
2075-4701
DOI:10.3390/met13121941