Phase-Selective and Localized TiO2 Coating on Additive and Wrought Titanium by a Direct Laser Surface Modification Approach

Titanium has been the material of interest in biological implant applications due to its unique mechanical properties and biocompatibility. Their design is now growing rapidly due to the advent of additive manufacturing technology that enables the fabrication of complex and patient-customized parts. Titanium dioxides (TiO2) coatings with different phases (e.g., anatase, rutile) and morphologies have shown to be effective in enhancing osteointegration and antibacterial behavior. This enhanced antibacterial behavior stems from the photocatalytic activity generated from crystalline TiO2 coatings. Anatase has commonly been shown to be a more photocatalytic oxide phase compared to rutile despite its larger band gap. However, more recent studies have suggested that a synergistic effect leading to increased photocatalytic activity may be produced with a combination of oxides containing both anatase and rutile phases. Here, we demonstrate the selective and localized formation of TiO2 nanostructures on additive and wrought titanium parts with anatase, rutile, and mixed phases by a laser-induced transformation approach. Compared to conventional coating processes, this technique produces desired TiO2 phases simply by controlled laser irradiation of titanium parts in an oxygen environment, where needed. The effects of processing conditions such as laser power, scanning speed, laser pulse duration, frequency, and gas flow on the selective transformation were studied. The morphological and structural evolutions were investigated using various characterization techniques. This method is specifically of significant interest in creating phase-selective TiO2 surfaces on titanium-based bioimplants, including those fabricated by additive manufacturing technologies.