Continuous adsorption of Metanil Yellow and Remazol Black B dyes onto fixed-bed of 3D graphene oxide/chitosan biopolymer
•3D-GCB fixed-bed adsorption was effective for MY and RBB removal.•The greatest bed adsorption capacity for MY was 157.06 mg/g.•The greatest bed adsorption capacity for RBB was 247.96 mg/g.•3D-GCB breakthrough data well fitted by Thomas and Yoon-Nelson models.•3D-GCB fixed-bed adsorbed RBB better th...
Gespeichert in:
Veröffentlicht in: | South African journal of chemical engineering 2024-04, Vol.48, p.276-284 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | •3D-GCB fixed-bed adsorption was effective for MY and RBB removal.•The greatest bed adsorption capacity for MY was 157.06 mg/g.•The greatest bed adsorption capacity for RBB was 247.96 mg/g.•3D-GCB breakthrough data well fitted by Thomas and Yoon-Nelson models.•3D-GCB fixed-bed adsorbed RBB better than MY.
Treatment of dye polluted water using sustainable and efficient approaches is essential to mitigate the detrimental effects of dyes. The present work reports on the adsorption effectiveness of a graphene-based adsorbent configured into a practical engineering structure, namely three-dimensional graphene oxide integrated with chitosan biopolymer (3D-GCB). This unique graphene configuration enabled its application in continuous fixed-bed adsorption of Metanil Yellow (MY) and Remazol Black B (RBB) dyes from polluted water for the first time. The breakthrough attributes of the fixed-bed of 3D-GCB were established in terms of bed depth (3 – 5 cm), influent concentration (100 – 200 mg/L for MY and 100 – 300 mg/L for RBB) and feed flowrate (2 – 4 mL/min). The greatest bed adsorption capacities attained were 157.06 and 247.96 mg/g for MY and RBB, respectively. The column parameters for obtaining these results were 5 cm bed depth, 2 mL/min feed flowrate, and 150 and 200 mg/L influent concentrations respectively for MY and RBB. The fixed-bed performance of the 3D-GCB was well correlated to the Thomas and Yoon-Nelson models, and the corresponding kinetic properties were determined. Furthermore, the higher affinity of the 3D-GCB for RBB as compared to MY was elucidated based on the ionic strengths of the dye molecule. The utilisation of sustainable and renewable raw materials, such as graphite and chitosan, have resulted in a 3D-GCB production cost of approximately RM 10.72 per gram. This work revealed the suitability of 3D-GCB as the state-of-the-art graphene composite for continuous adsorption of anionic dyes, specifically MY and RBB. |
---|---|
ISSN: | 1026-9185 |
DOI: | 10.1016/j.sajce.2024.02.007 |