Replication Data for: Natural Spider Silk Nanofibrils Produced by Assembling Molecules or Disassembling Fibers

Raw data of optical microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and diameter measurements of the exfoliated and self-assembled nanofibrils for our manuscript. File Formats AFM raw data is provided in Gwyddion format, which can be viewed using the Gwyddion AFM viewer, which has been released under the GNU public software licence GPLv3 and can be downloaded free of charge at http://gwyddion.net/ Optical microscopy data is provided in JPEG format SEM raw data is provided in TIFF format Data analysis codes were written in MATLAB ( https://www.mathworks.com/products/matlab ) and stored as *.m files Data analysis results were stored as MATLAB multidimensional arrays (MATLAB “struct” data format, *.mat files) Data (Folder Structure) The data in the dataverse is best viewed in "Tree" mode. ReadMe.md This description in Markdown format. Figure 2 - Microscopy Raw Data Figure 2 - panel a.jpg (7.2 MB) Optical micrograph (JPEG format) Figure 2 - panel b.jpg (6.1 MB) Optical micrograph (JPEG format) Figure 2 - panel c & f.tif (1.2 MB) SEM raw data (TIFF format) Figure 2 - panel d.tif (1.2 MB) SEM raw data (TIFF format) Figure 2 - panel e - Exfoliated Fibrils.gwy (32.0 MB) AFM raw data (Gwyddion format) Figure 3 - AFM Raw Data Figure 3 - Panel a - Exfoliated fibrils.gwy (81.5 MB) AFM raw data (Gwyddion format) Figure 3 - Panel c - Self-assembled fibrils.gwy (24.0 MB) AFM raw data (Gwyddion format) Figure 3 - Diameter Measurements Figure 3a and Figure 3c show the AFM images of exfoliated and self-assembled nanofibrils, respectively. However, due to the AFM tip-induced broadening of lateral dimensions of small features (such as nanofibrils), the diameters of nanofibrils are generally overestimated in AFM images. Hence, the diameters of the nanofibrils were estimated as the full width at half maximum (FWHM) value of line scans taken over nanofibrils perpendicular to their axial direction. Line profiles were taken at multiple locations using Gwyddion, and the raw data were stored in MATLAB struct files ( lineProfileData_Exfoliated.mat and lineProfileData_Self-Assembled.mat ). These data files can be directly imported into MATLAB and will appear as “DataExf” and “DataSA” in MATLAB workspace. For instance, “DataExf.x{i}” contains the x-axis data of i-th line profile, and “DataExf.y{i}” contains the y-axis data of i-th line profile. The MATLAB codes MainCode_Exf.m and MainCode_SA.m are used to fit Gaussian curves for each line profile and