Acoustical measurements of a rabab reconstructed after a pictorial source from the 16th century

Acoustical measurements of a rabab reconstructed after a pictorial source from the 16th century Instrument: rabab Pictorial source: Jorge Affonso (attr.), The Adoration of the Shepherds, 1515, oil on wood, Lissabon, Museu Nacional de Arte Antiga Instrument maker: Thilo Hirsch Year of manufacture: 2022 Location: Basel, property of the ensemble arcimboldo Dimensions: Total length: 510 mm Max. Body width: 110 mm Body depth: approx. 93 mm Vibrating string lengths: d'-string: 351 mm a-string: 350 mm e-string: 348 mm Materials: Body: cherry Pegbox: cherry Fingerboard: cerry Bars: spruce Nut/String attachment button: bone Bridge: boxwood Top: goatskin The main aim of this research was to measure the acoustic effects of the different sound holes. To do this, the instrument was first measured with the rosette and the two holes in the body open, then with the body holes closed. Acoustical measurements: Alexander Mayer, mdw - University of Music and Performing Arts Vienna, Department of Music Acoustics – Wiener Klangstil (IWK), 25.9.2023 Force: Impact hammer exciting at the bass side of the bridge ACC: Acceleration measured on the same side, close to the impact point. Average is the average of all measurements (to be used in the analysis). Photos of the setup: Thilo Hirsch Folder modell_affonso Files: affonso_1 to 6 (Description: holes open) Folder modell_affonso_loecher_zu Files: affonso_hc_1 to 6 (Description: both holes closed) ________________________ How to read VIA-Files: Line 1 to 9: Header, Line 8 holds the number of values Data is organized as followed: 1st col: Frequency [Hz], 2nd col: Magnitude [as Factor not dB!], 3rd col: Phase [rad], 4th col: Real part [as Factor not dB!], 5th col: Imaginary part [as Factor not dB!]. So only first 3 columns are needed! To get dB Value: Amplitude[dB] = 20 log [Magnitude] Usually the Magnitude was calculated as response/reference (input) in the frequency domain. As for measuring the mechanical admittance the sensor is most likely an accelerometer (capturing the response in m/s2 of the object of interest) and the reference an impact hammer capturing the input force in Newton. As the mechanical admittance is defined as v/F (speed over force) the acceleration signal has to be integrated. The here captured signals are integrated in the frequency domain, what means the magnitude is divided by the corresponding frequency value in s-1. Values coded like: 3.30750000000000E+1 -> 3.3075 * 10 -> 33.075