Determination of an Extrusion Machine Performance Based on the Working Field of the Extruder Die

Some inventions along with theoretical and experimental research made it possible to increase the output of a thermally homogeneous melt provided by the screw. However, the quality of the extruded product depends on some specific features of the extrusion die and to a large extent on the rheological behavior (viscous and elastic) of the polymer melt. The mismatch between the design of the screw-cylinder subassembly and the design of the extrusion die results in products with relatively short service life. The present paper has drawn up the working field of the extruder die and adjusted it based on the limitations imposed by the screw-cylinder subassembly, namely: - the maximum output rate that ensures the required thermal homogeneity of the melt; - the maximum output at which the heating system on the barrel (and possibly the screw) ensures the extrusion temperature; - the minimum economic output corresponding to the diameter of the screw. The working field of some extrusion dies for blown films of the following polymers have been plotted: polypropylene, low density polyethylene, high density polyethylene and ethylene vinyl acetate.