Influence of Technological Parameters on the Dimension of GEAR Parts Generated with PLA Matherial by FDM 3D Printing

The purpose of this research is to establish the technology of 3D printable production on the principle of FDM of gears made of PLA, ABS and PETG mainly. In the paper we present first the dimensional generation and specific aspects that need to be considered to produce gears with internal or externa...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Materiale Plastice 2018-06, Vol.55 (2), p.247-251
Hauptverfasser: Vasilescu, Mircea Dorin, Fleser, Traian
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The purpose of this research is to establish the technology of 3D printable production on the principle of FDM of gears made of PLA, ABS and PETG mainly. In the paper we present first the dimensional generation and specific aspects that need to be considered to produce gears with internal or external teeth of the cylindrical type with vertical or inclined teeth. Generating the gears appeared as a necessity for the reconditioning of the components of the processing machines and of the electric machines made both in the process of elaboration of the bachelor s and the laboratory works, with reduced energy resource consumption and low pollution as low as possible. After the construction, we past to identify the dimension that have implications for both mechanical and kinematic resistance to achieve a product with good cinematic and functional characteristics. After that are made an analysis of the layers generated, both from the computer simulation and from the point of view of the analysis of layers physically generated on a gear tooth with external teeth.
ISSN:0025-5289
2668-8220
DOI:10.37358/MP.18.2.5005