Effect of Speed, Feed and Depth of Cut on Machining Induced Residual Stresses in Aisi 1045 Steel
Residual stress that are induced during machining of components plays a significant part in the endurance and life of the component. The magnitude and nature of the residual stresses have been of interest to many researchers across the globe. The present work involves methodology to find out the inf...
Gespeichert in:
Veröffentlicht in: | International journal of recent technology and engineering 2019-07, Vol.8 (2), p.3397-3400 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Residual stress that are induced during machining of components plays a significant part in the endurance and life of the component. The magnitude and nature of the residual stresses have been of interest to many researchers across the globe. The present work involves methodology to find out the influence of factors on the residual stresses. The machining parameters were varied and the residual stresses were determined using non-destructive method, namely X-ray diffraction. Using statistical methods, the influence of the machining parameters was ascertained. This paper aims at investigating the residual stresses in AISI 1045 steel, induced due to milling. AISI 1045 steel was considered as it is a widely used material and its applications are innumerable. It was observed that speed and feed have significant influence on stresses left behind after the machining is completed. Using statistical techniques a mathematical model was developed which is further used to predict the residual stresses. The error percentage of the predicted values was less than 5%. The results obtained were promising and future work involves the optimization of the machining parameters. |
---|---|
ISSN: | 2277-3878 2277-3878 |
DOI: | 10.35940/ijrte.A1262.078219 |