Fabrication and Characterization of Az91e Hybrid Metal Matrix Composites

The current work expects to decide the attributes of compression of the (Magnesium composite) AZ 91E-Zro2-Fly Ash Hybrid Metal Matrix utilizing the conventional explanatory strategy and limited component technique. Fly ash and ZrO2 taken as equal weight proportions, composites are fabricated by means of a vortex method under the path of stir casting. The density and fracture toughness were found experimentally, the experimental density was decreased compare to the theoretical density, but the density is increased slightly for composites compare to the base material. The fracture toughness is decreased for composites compare to the base material; this is due to the improvement of the grains by adding strengthening molecules. The compressive strength was decreased by decreasing of the height of the deformation in percentage for base material and the composites of H/D 1.0 and 1.5. The compressive strength is high for the composites compare to the base material even the density of the composite is little bit high, hence suggested that composite system gives the better compressive strength results