Monitor Points Selection in CFD FLACS for Gas Detector Placement
Gas detector first invented was in 1815 to detect the presence of the methane gas and becomes part of a safety system when it is capable to detect the gas leakage and decrease the risk of major accident occurrence. However, the efficiency of the gas detector has been questioned among industry people...
Gespeichert in:
Veröffentlicht in: | International journal of innovative technology and exploring engineering 2020-01, Vol.9 (3), p.3531-3536 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Gas detector first invented was in 1815 to detect the presence of the methane gas and becomes part of a safety system when it is capable to detect the gas leakage and decrease the risk of major accident occurrence. However, the efficiency of the gas detector has been questioned among industry people due to unable to measure the effectiveness of the gas detector quantitatively. Industry people has a problem on how many and where should they locate the gas detector. This study explained the very beginning steps on how to determine the number and location of the gas detector should be installed. This research simulated the gas explosion cloud by using CFD FLACS at highly hazardous area by setting the four parameters with different values of wind speed, wind direction, leak rate and leak direction. In order to optimize the placement of the gas detector, three objectives need to be achieved: 1) to obtain the fastest response time of the gas detector to any gas leakage, 2) to ensure the availability of the gas detection system in worst conditions and 3) to place the gas detector in the potentially hazardous area. The locations of the gas detector meet the objectives based on the approach applied in this study. |
---|---|
ISSN: | 2278-3075 2278-3075 |
DOI: | 10.35940/ijitee.C8573.019320 |