Parameterization of the Annual Surface Temperature and Mass Balance of Antarctica

This study entails the parameterization, by means of a linear multiple-regression analysis, of the annual surface temperature and mass balance of Antarctica. The analysis was performed for the entire ice cap as well as for three separate regions: ice shelves (elevation less than 200 m), the interior (elevation above 1500 m), and the escarpment region in between. It was found that temperature can be parameterized very well in terms of elevation and latitude. The latitudinal gradient on the ice shelves can be explained by the super-adiabatic lapse rate along the surface and latitudinal temperature gradient in the interior, assuming adiabatic descent of air in the inversion layer from the interior region towards the coast and an axisymmetric spreading over the ice shelves. The surface mass balance can be parameterized reliably only in the interior, where it has a strong positive correlation with the saturation vapour pressure of the free atmosphere, and a significant correlation with the shape of the dome. The convex shape of the dome contributes to the mass balance by inducing subsidence of the relatively moist air of the free atmosphere into the inversion layer. This results in precipitation, as radiative cooling in the inversion exceeds adiabatic warming. An estimate is made of the annual horizontal and vertical advective velocities in the free atmosphere above the interior, based on regression results and a physical analysis of the precipitation processes in this region. A temperature sensitivity analysis was performed for the current mass-balance distribution. For a 1 K. rise in surface temperature, the regression estimate of the increase in accumulation on the grounded ice sheet is equivalent to a rate of sea-level lowering of 0.2 mm a−1. This is about 30% less than estimates based on the current mass balance perturbated by the increase in saturation vapour pressure of the free atmosphere.