An Incremental Formulation of Constitutive Equations for Deposited Snow
The behaviour of a snow mass under natural loadings (gravity forces, boundary conditions) can be computed by the finite-element method, in so far as a convenient formulation of the stress–strain relationship for snow is available. This paper deals with such a formulation given in incremental form. E...
Gespeichert in:
Veröffentlicht in: | Journal of glaciology 1980, Vol.25 (92), p.289-307 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The behaviour of a snow mass under natural loadings (gravity forces, boundary conditions) can be computed by the finite-element method, in so far as a convenient formulation of the stress–strain relationship for snow is available. This paper deals with such a formulation given in incremental form. Experiments have been performed, which show that deposited snow can be considered as a non-linear visco-elastic material with memory effect. The proposed theoretical formulation takes into account these properties. The elastic part of the deformation is assumed to be isotropic and non-linear; the viscous part is expressed in terms of a creep-rate, which results from a superposition of elementary creep-rates according to Boltzmann’s principle. The values of parameters can be obtained from isotropic creep experiments. The experimental data and the resulting parameters are reported. Since the parameters were determined, the formulation of the rheological law was then tested by integration on “stress–strain paths" corresponding to other experiments of a different type, performed on the same snow. The experiments are triaxial tests at constant axial strain-rate, with a preliminary stage of isotropic compression. Experimental data are compared to theoretical curves obtained by integration of the rheological law. The calculated behaviour is consistent with the experimental results. |
---|---|
ISSN: | 0022-1430 1727-5652 |
DOI: | 10.3189/S0022143000010509 |