Experimental and numerical investigation on natural convection heat transfer in nanofluids

An experimental study has been undertaken concerning natural convection heat transfer of nanofluids over a cylindrical heater with a constant wall heat flux condition. The cylindrical heater having 7.1 mm O. D. and 0.5 mm thickness with 100 mm heated length was used as heater surface. The heat flux was varied from 0 to 50 000 W/m and the corresponding Rayleigh number range is varied from 3 × 10 to 1.65 × 10 . Different Nanofluids were used i. e. Aluminium oxide, Titanium dioxide, Silicon dioxide and Copper oxide with concentration varying from 0.0005 % to 0.05 % by weight. Results show that there was a reduction in natural convection heat transfer coefficient of nanofluids as compared to water. Experimental results were compared with existing models for similar geometry. However, the available correlation was found to be unable to predict experimental data as it does not take into account the effect of particle concentration. A new empirical model was developed based on the experimental data including the effect of nanoparticles concentration which predicts the experimental data satisfactorily.