Culture And Staining of Pollen Grains of Ricinus communis

Germinating and growing pollen grains (male gametophytes) of Ricinus communis L. in liquid culture is achieved as follows: Pollen is collected over a 10-15 min period from mature anther clusters which have been removed from the male flowers and which have been kept at 25° C and 40-60% relative humidity. Samples weighing between 2.5 and 5.0 mg are brought as quickly as possible into a Desicote treated vial containing 17% sucrose and 30 ppm H3BO3 in boiled distilled water. The proportion (w/v) of pollen to culture solution should be 1:100. Shed pollen is kept in a humidity chamber whenever it is not being handled. The air in the culture vial is replaced by O2 at the pressure of 1 atmosphere plus 5 lb and the sealed vials are shaken gently for 8-10 hr while partially immersed in a waterbath kept at 30° C. The pollen is fixed by the addition to the incubation suspension of an absolute alcohol-lactic acid (4:1) fixing fluid. The proportion used is 36 parts of fixing fluid to 1 part of culture solution. The fixed pollen can be stored in the fixative. Smears are prepared by applying single drops of the constantly agitated suspension of fixed pollen to a microscope slide. After each drop has spread out and dried, an additional drop is added until 10-20 have been applied. The preparations are stained by adding a drop of 1% acetic-orcein and are sealed with fingernail lacquer. The method is well adapted to the following types of studies: pollen germination, physiology of pollen tube growth, morphology of the male gametocyte, and physiology and cytology of the generative cell and nucleus.