Tableting Properties of Experimental and Commercially Available Lactose Granulations for Direct Compression

Abstract Lactose granulations (125-250 μm) were prepared from two different β-lactose monohydrate powders and one roller dried B-lactose powder respectively, by wet granulation with only water as a binder. As an effect of the granulation process, the flow properties improved, but the compactibility decreased. Moreover, the lubricant sensitivity of the granule fractions was higher than found for the starting materials. The compactibility of the granule fractions was found to be dependent on the type of lactose, the surface area of the starting powder and the granule bulk density. For lubricated lactose granulations, the lubricant sensitivity, expressed as Lubricant Sensitivity Ratio (LSR), increased with an increase of bulk density. The β-lactose content of roller-dried β-lactose is hardly affected by the granulation process, which explains the good compactibility of the granule fractions prepared from this type of lactose. On the other hand, anhydrous α-lactose present in the roller-dried β-lactose starting material is converted into α-lactose monohydrate during the granulation process, which improves tablet disintegration. The compaction properties of commercially available lactose granulations have been compared with those of the experimental granulations and with a free flowing sieved α-lactose monohydrate. As an effect of the higher powder surface area and the relatively low bulk density, TablettoseR has a better compactibility than α-lactose monohydrate 100 Mesh. The excellent compactibility of another commercially available lactose granulation, PharmatoseK DCL 15, was attributed to the presence of more β-lactose, providing strong intergra-nular cohesion.