Hot forging of MAX compounds SHS-produced in the Ti-Al-C system

Hot forging of MAX compounds SHS-produced in the Ti-Al-C system

Investigated was the forgeability (extent of compression) of still hot SHS products (MAX phases) formed in the Ti-Al-C system at relatively low applied pressures (1.5–15.0 MPa in a press punch) in conditions of free SHS compression. The extent of compression was measured as a function of time delay...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:International journal of self-propagating high-temperature synthesis 2009-09, Vol.18 (3), p.194-199
Hauptverfasser: Stolin, A. M., Vrel, D., Galyshev, S. N., Hendaoui, A., Bazhin, P. M., Sytschev, A. E.
Format: Artikel
Sprache:eng
Schlagworte:
Chemistry and Materials Science
Materials Science
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Investigated was the forgeability (extent of compression) of still hot SHS products (MAX phases) formed in the Ti-Al-C system at relatively low applied pressures (1.5–15.0 MPa in a press punch) in conditions of free SHS compression. The extent of compression was measured as a function of time delay (between the end of reaction and compression) and applied pressure. Characterized were the microstructure and phase composition of thus obtained MAX compounds.
ISSN:1061-3862
1934-788X
DOI:10.3103/S1061386209030108