Factors affecting cyclic lifetime of EB-PVD thermal barrier coatings with various bond coats

Standard EB-PVD (electron beam physical vapor deposition) thermal barrier coatings (TBCs) of partially yttria-stabilized zirconia were applied on Ni-base substrate alloys and thermally cycled with = 1100 °C. Two different bond coats were investigated: NiCoCrAlY and NiPtAl. The longest lifetimes have been achieved on the Hf-containing Rene142 substrate. A rough interface between TGO (thermally grown oxide) and bond coat with hafnia pegs is characteristic for these alloys. A bond coat heat treatment in Ar–H significantly improved the lifetime of the TBC system with IN100 + PtAl bond coats, whereas reduced lifetimes were found on IN100 + NiCoCrAlY. Spallation of the TBCs was correlated to TGO thickness and microstructure. The TGO growth is faster for NiCoCrAlY than for NiPtAl bond coats, while TBC lifetime is longer for the NiCoCrAlY systems. Tests with reduced cycle length yielded an increased number of cycles to failure for IN100+NiCoCrAlY, but left the time to failure at temperature unchanged. TBC thickness had only a limited influence on cyclic lifetime.