A Study on Three-Dimensional Analysis of the Stress of Force-Fitted Helical Gears

Recently, the reduction of cost in the gear field has become a serious problem and consequently, the force-fitted gear has become the subject of attention. Although some studies on force-fitted spur gears have been presented, there have been very few studies hitherto which deal with force-fitted hel...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry Vibration, control engineering, engineering for industry, 1988/12/15, Vol.31(4), pp.758-764
Hauptverfasser: ARAI, Norihisa, TOYAO, Tetuya, ASAOKA, Yuuji, FUKUYAMA, Hiroya
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Recently, the reduction of cost in the gear field has become a serious problem and consequently, the force-fitted gear has become the subject of attention. Although some studies on force-fitted spur gears have been presented, there have been very few studies hitherto which deal with force-fitted helical gears. In view of such a situation, the force-fitted helical gear was chosen as the subject of the author's study. That is to say, by using the three-dimensional finite element method, stresses at the root fillet of a gear tooth caused by force-fitting were calculated. Practical formulas of these stresses can be introduced.
ISSN:0914-8825
DOI:10.1299/jsmec1988.31.758