Field Investigation of Relationship between Pavement Surface Texture and Friction

Proper tire–pavement interaction is essential for the safety of motorists. Pavement surface texture is a major contributing factor to tire–pavement friction. This study performed a series of statistical analyses of field-measured friction and texture data to find the texture–friction correlation. Th...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Transportation research record 2018-12, Vol.2672 (40), p.395-407
Hauptverfasser: Kouchaki, Sareh, Roshani, Hossein, Prozzi, Jorge A., Garcia, Natalia Zuniga, Hernandez, Joaquin Bernardo
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Proper tire–pavement interaction is essential for the safety of motorists. Pavement surface texture is a major contributing factor to tire–pavement friction. This study performed a series of statistical analyses of field-measured friction and texture data to find the texture–friction correlation. Three test sections with different pavement types were selected within the state of Texas. Data were collected at three locations in the right wheel path and three locations in the center of the lane for each test section. To measure the texture data, the researchers used the circular track meter (CTM) and a prototype measurement device developed in-house and consisting of a line laser scanner (LLS). Friction measurements were obtained with the dynamic friction tester (DFT) and Grip-Tester. The mean profile depth (MPD) was calculated by using the measured texture data. The relationship between the MPD values and the friction numbers obtained from the Grip-Tester and DFT was investigated at speeds of 50 and 70 km/h (31.1 and 43.5 mph). The repeatability and reliability of both the developed LLS prototype and the Grip-Tester were also evaluated, as well as the effect of test speed on friction measurement. The results indicated a strong positive correlation between the texture and friction data. In addition, the developed LLS prototype was able to scan the pavement surface texture more reliably and precisely than the CTM in terms of vertical and horizontal resolution. The Grip-Tester showed promising results compared with the DFT with regards to the friction measurement.
ISSN:0361-1981
2169-4052
DOI:10.1177/0361198118777384