Potassium Permanganate-Based Slurry to Reduce the Galvanic Corrosion of the Cu/Ru/TiN Barrier Liner Stack during CMP in the BEOL Interconnects

Chemical mechanical polishing (CMP) behavior of Cu/Ru/TiN barrier liner stack was investigated with a slurry comprising of silica abrasives, potassium permanganate (KMnO4), guanidine carbonate (GC) and benzotriazole (BTA) in the alkaline region. The corrosion and polishing behavior of the Cu, Ru and TiN films in the solution consisting of the above additives were characterized by open circuit potential and potentiodynamic measurements, polishing rates, dissolution rates and contact angle measurements. A slurry comprising of 10 mM KMnO4, 1 wt% GC and 5 wt% Silica at pH 10 has shown adequate polish rates as well as low individual film corrosion. However, 1 mM BTA was needed to maintain the ΔECORR of both the Cu/Ru and Ru/TiN couples at