Improvement in the Device Characteristics of Tin Oxide Thin-film Transistors by Adopting Ultralow-Pressure Sputtering

Here in, thin film transistors (TFTs) were fabricated with the tin oxide channel, deposited by using ultralow-pressure sputtering (ULPS), are reported. The effect of ULPS on the device performance of the tin oxide TFTs was investigated. The TFTs with tin oxide channel, deposited by conventional sput...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Huh, Myung Soo, Yang, Bong Sop, Oh, Seungha, Won, Seok-Jun, Jeong, Jae Kyeong, Hwang, Cheol Seong, Kim, Hyeong Joon
Format: Tagungsbericht
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Here in, thin film transistors (TFTs) were fabricated with the tin oxide channel, deposited by using ultralow-pressure sputtering (ULPS), are reported. The effect of ULPS on the device performance of the tin oxide TFTs was investigated. The TFTs with tin oxide channel, deposited by conventional sputtering pressure (CSP), did not show a promising performance. However, the saturation mobility and threshold voltage of the ULPS SnOx TFTs were improved to ~ 3.9 cm2/Vs and ~ 0.6 V, respectively. The improved device performance of ULPS film was attributed to the decreased carrier concentration, which was originated from the formation of nano-crystalline phase and the higher film density compared to CSP film. We also compared the crystalline structure of ULPS and CSP film by using high-resolution transmission electron microscopy
ISSN:1938-5862
1938-6737
DOI:10.1149/1.3422588