Development of Signal Interpolated Phase Timing Recovery System for High Density Magneto-Optical Disks
We developed a new timing recovery system for magneto-optical disks (MO) with a higher recording density and higher transfer rate but it is difficult to achieve these without signal to noise ratio (SNR) degradation in the MO readout signal. Therefore, for signal processing, we have developed a turbo...
Gespeichert in:
Veröffentlicht in: | Japanese Journal of Applied Physics 2004-07, Vol.43 (7S), p.4839 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | We developed a new timing recovery system for magneto-optical disks (MO) with a higher recording density and higher transfer rate but it is difficult to achieve these without signal to noise ratio (SNR) degradation in the MO readout signal. Therefore, for signal processing, we have developed a turbo code technology, [rf1] which can obtain a high enough coding gain. However, as optimal phase to obtain the optimum performance of the turbo code must be detected, we developed a very precise phase timing recovery system that works under a degraded SNR in the MO readout signal. Moreover, as the turbo code is a kind of block code, which requires decoding by a turbo block unit, we also developed a system for detecting the start point for turbo decoding. We developed a new timing recovery system and, in this paper, we report architecture and performance evaluations of this system. |
---|---|
ISSN: | 0021-4922 1347-4065 |
DOI: | 10.1143/JJAP.43.4839 |