Thermoelectric Properties of Semimetal and Semiconductor Bi1 –xSbx Foils and Wires

The results of experimental investigations into the thermoelectric properties (electrical conductivity, thermoelectric power, and thermal conductivity) of microtextured foils and single-crystal wires based on semimetal and semiconductor Bi 1 – x Sb x alloys are presented in the temperature range of...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Semiconductors (Woodbury, N.Y.) N.Y.), 2019-05, Vol.53 (5), p.657-661
Hauptverfasser: Nikolaeva, A., Konopko, L., Gherghishan, I., Rogacki, K., Stachowiak, P., Jezowski, A., Shepelevich, V., Prokoshin, V., Gusakova, S.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The results of experimental investigations into the thermoelectric properties (electrical conductivity, thermoelectric power, and thermal conductivity) of microtextured foils and single-crystal wires based on semimetal and semiconductor Bi 1 – x Sb x alloys are presented in the temperature range of 4.2–300 K. It is found that the band gap Δ E in Bi–17 at % Sb wires increases with decreasing wire diameter d , which is a manifestation of the quantum-size effect. At low temperatures ( T < 50 K), in the wires with d < 400 nm, the electrical conductivity increases due to the significant contribution of highly conductive surface states characteristic of topological insulators. It is found for the first time that the thermal conductivity of semimetal Bi–3 at % Sb foils at low temperatures is two orders of magnitude lower, and that of semiconductor Bi–16 at % Sb foils one order of magnitude lower, than that in bulk samples of the corresponding composition due to significant phonon scattering at grain boundaries and surfaces. This effect leads to considerable enhancement of the thermoelectric figure-of-merit ZT and can be used in miniature low-temperature thermoelectric energy converters.
ISSN:1063-7826
1090-6479
DOI:10.1134/S1063782619050191