High rate deposition of photocatalytic TiO2 films with high activity by hollow cathode gas-flow sputtering method

Photocatalytic TiO2 films were deposited by a hollow cathode gas-flow sputtering method using two Ti metal targets mounted parallel to each other. The Ar and O2 flow rates were 3000 and 0–50SCCM (SCCM denotes cubic centimeter per minute at STP), respectively, and total gas pressure during the deposi...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of vacuum science & technology. A, Vacuum, surfaces, and films Vacuum, surfaces, and films, 2008-07, Vol.26 (4), p.893-897
Hauptverfasser: Kubo, Yoshiyuki, Iwabuchi, Yoshinori, Yoshikawa, Masato, Sato, Yasushi, Shigesato, Yuzo
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Photocatalytic TiO2 films were deposited by a hollow cathode gas-flow sputtering method using two Ti metal targets mounted parallel to each other. The Ar and O2 flow rates were 3000 and 0–50SCCM (SCCM denotes cubic centimeter per minute at STP), respectively, and total gas pressure during the deposition was maintained at 45Pa. The highest deposition rate for the photocatalytic TiO2 films was 162nm∕min at 30SCCM of O2 flow. The as-deposited films and postannealed films, annealed in air at 300°C for 1h, were used to carry out photocatalytic decomposition of acetaldehyde (CH3CHO). In particular, the postannealed films showed extremely high photocatalytic activity compared to the photocatalytic activity of films deposited by conventional reactive sputtering.
ISSN:0734-2101
1520-8559
DOI:10.1116/1.2836425