Scaling Considerations for Thermal and Pressure-Sensitive Paint Methods Used to Determine Adiabatic Effectiveness

To be representative of engine conditions, a measurement of film cooling behavior with an experiment must involve matching certain nondimensional parameters, such as freestream Reynolds number. However, the coolant flowrate must also be scaled between the experiments and engine conditions to accurat...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of turbomachinery 2021-01, Vol.143 (1)
Hauptverfasser: McNamara, Luke J, Fischer, Jacob P, Rutledge, James L, Polanka, Marc D
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:To be representative of engine conditions, a measurement of film cooling behavior with an experiment must involve matching certain nondimensional parameters, such as freestream Reynolds number. However, the coolant flowrate must also be scaled between the experiments and engine conditions to accurately predict film cooling effectiveness. This process is complicated by gas property variation with temperature. Additionally, selection of the appropriate coolant flowrate parameter to scale from low to high temperatures is a topic of continued uncertainty. Furthermore, experiments are commonly conducted using thermal measurement techniques with infrared thermography (IR), but the use of pressure-sensitive paints (PSPs) implementing the heat-mass transfer analogy is also common. Thus, the question arises of how the adiabatic effectiveness distributions compare between mass transfer experimental methods and thermal experimental methods and whether these two methods are sensitive to coolant flowrate parameters in different ways. In this study, a thermal technique with IR was compared with a heat-mass transfer method with a PSP on a flat plate model with a 7-7-7 film cooling hole. While adiabatic effectiveness is best scaled by accounting for specific heats with the advective capacity ratio (ACR) using thermal techniques, results revealed that PSP measurements are scaled best with the mass flux ratio (M). The difference in these methods has significant implications for engine designers that rely on PSP experimental data to predict engine thermal behavior as PSP is fundamentally not sensitive to the same relevant physical mechanisms to which thermal methods are sensitive.
ISSN:0889-504X
1528-8900
DOI:10.1115/1.4049102