Convective Heat Transfer Coefficients in a Building-Integrated Photovoltaic/Thermal System
This paper presents an experimental study for the development of convective heat transfer correlations for an open loop air-based building-integrated photovoltaic/thermal (BIPV/T) system. The BIPV/T system absorbs solar energy on the top surface, which includes the photovoltaic panels and generates...
Gespeichert in:
Veröffentlicht in: | Journal of solar energy engineering 2011-05, Vol.133 (2) |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | |
---|---|
container_issue | 2 |
container_start_page | |
container_title | Journal of solar energy engineering |
container_volume | 133 |
creator | Candanedo, Luis M Athienitis, Andreas Park, Kwang-Wook |
description | This paper presents an experimental study for the development of convective heat transfer correlations for an open loop air-based building-integrated photovoltaic/thermal (BIPV/T) system. The BIPV/T system absorbs solar energy on the top surface, which includes the photovoltaic panels and generates electricity while also heating air drawn by a variable speed fan through a channel formed by the top roof surface with the photovoltaic modules and an insulated attic layer. The BIPV/T system channel has a length/hydraulic diameter ratio of 38, which is representative of a BIPV/T roof system for 30–45 deg tilt angles. Because of the heating asymmetry in the BIPV/T channel, two average Nusselt number correlations are reported as a function of Reynolds number: one for the top heated surface and the other for the bottom surface. For the top heated surface, the Nusselt number is in the range of 6–48 for Reynolds numbers ranging from 250 to 7500. For the bottom insulated surface, the Nusselt number is in the range of 22–68 for Reynolds numbers ranging from 800 to 7060. This paper presents correlations for the average Nusselt number as a function of Reynolds number; this correlation is considered adequate for the design of BIPV/T systems where forced convection dominates. Local Nusselt number distributions are also presented for laminar and turbulent flow conditions. |
doi_str_mv | 10.1115/1.4003145 |
format | Article |
fullrecord | <record><control><sourceid>asme_cross</sourceid><recordid>TN_cdi_crossref_primary_10_1115_1_4003145</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>438061</sourcerecordid><originalsourceid>FETCH-LOGICAL-a320t-2bc5b8231552f21ca394182c8a3f13258f209304e6c2a1fcac347a08496dd1a83</originalsourceid><addsrcrecordid>eNo9kD1PwzAURS0EEqUwMLN4YWBI6-eP1BkhAlqpEkiUhSV6dezWVZpUtlup_56gVkx3Offp3UPIPbARAKgxjCRjAqS6IANQXGe60PklGTAoiiznAq7JTYwbxkAIxQfkp-zagzXJHyydWkx0EbCNzgZadtY5b7xtU6S-pUhf9r6pfbvKZm2yq4DJ1vRz3aXu0DUJvRkv1jZssaFfx5js9pZcOWyivTvnkHy_vS7KaTb_eJ-Vz_MMBWcp40ujlrr_TCnuOBgUhQTNjUbhQHClHWeFYNLmhiM4g0bICTIti7yuAbUYkqfTXRO6GIN11S74LYZjBaz6k1JBdZbSs48ndofRYOP6scbH_wKXvZZcTnru4cRh3Npq0-1D20-opNAsB_ELY0ppqQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Convective Heat Transfer Coefficients in a Building-Integrated Photovoltaic/Thermal System</title><source>ASME Transactions Journals</source><creator>Candanedo, Luis M ; Athienitis, Andreas ; Park, Kwang-Wook</creator><creatorcontrib>Candanedo, Luis M ; Athienitis, Andreas ; Park, Kwang-Wook</creatorcontrib><description>This paper presents an experimental study for the development of convective heat transfer correlations for an open loop air-based building-integrated photovoltaic/thermal (BIPV/T) system. The BIPV/T system absorbs solar energy on the top surface, which includes the photovoltaic panels and generates electricity while also heating air drawn by a variable speed fan through a channel formed by the top roof surface with the photovoltaic modules and an insulated attic layer. The BIPV/T system channel has a length/hydraulic diameter ratio of 38, which is representative of a BIPV/T roof system for 30–45 deg tilt angles. Because of the heating asymmetry in the BIPV/T channel, two average Nusselt number correlations are reported as a function of Reynolds number: one for the top heated surface and the other for the bottom surface. For the top heated surface, the Nusselt number is in the range of 6–48 for Reynolds numbers ranging from 250 to 7500. For the bottom insulated surface, the Nusselt number is in the range of 22–68 for Reynolds numbers ranging from 800 to 7060. This paper presents correlations for the average Nusselt number as a function of Reynolds number; this correlation is considered adequate for the design of BIPV/T systems where forced convection dominates. Local Nusselt number distributions are also presented for laminar and turbulent flow conditions.</description><identifier>ISSN: 0199-6231</identifier><identifier>EISSN: 1528-8986</identifier><identifier>DOI: 10.1115/1.4003145</identifier><identifier>CODEN: JSEEDO</identifier><language>eng</language><publisher>New York, NY: ASME</publisher><subject>Applied sciences ; Direct energy conversion and energy accumulation ; Electrical engineering. Electrical power engineering ; Electrical power engineering ; Energy ; Energy. Thermal use of fuels ; Exact sciences and technology ; Heat transfer ; Miscellaneous ; Natural energy ; Photoelectric conversion ; Photovoltaic conversion ; Solar cells. Photoelectrochemical cells ; Solar energy ; Theoretical studies. Data and constants. Metering</subject><ispartof>Journal of solar energy engineering, 2011-05, Vol.133 (2)</ispartof><rights>2015 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-a320t-2bc5b8231552f21ca394182c8a3f13258f209304e6c2a1fcac347a08496dd1a83</citedby><cites>FETCH-LOGICAL-a320t-2bc5b8231552f21ca394182c8a3f13258f209304e6c2a1fcac347a08496dd1a83</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,777,781,27905,27906,38501</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=24133647$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Candanedo, Luis M</creatorcontrib><creatorcontrib>Athienitis, Andreas</creatorcontrib><creatorcontrib>Park, Kwang-Wook</creatorcontrib><title>Convective Heat Transfer Coefficients in a Building-Integrated Photovoltaic/Thermal System</title><title>Journal of solar energy engineering</title><addtitle>J. Sol. Energy Eng</addtitle><description>This paper presents an experimental study for the development of convective heat transfer correlations for an open loop air-based building-integrated photovoltaic/thermal (BIPV/T) system. The BIPV/T system absorbs solar energy on the top surface, which includes the photovoltaic panels and generates electricity while also heating air drawn by a variable speed fan through a channel formed by the top roof surface with the photovoltaic modules and an insulated attic layer. The BIPV/T system channel has a length/hydraulic diameter ratio of 38, which is representative of a BIPV/T roof system for 30–45 deg tilt angles. Because of the heating asymmetry in the BIPV/T channel, two average Nusselt number correlations are reported as a function of Reynolds number: one for the top heated surface and the other for the bottom surface. For the top heated surface, the Nusselt number is in the range of 6–48 for Reynolds numbers ranging from 250 to 7500. For the bottom insulated surface, the Nusselt number is in the range of 22–68 for Reynolds numbers ranging from 800 to 7060. This paper presents correlations for the average Nusselt number as a function of Reynolds number; this correlation is considered adequate for the design of BIPV/T systems where forced convection dominates. Local Nusselt number distributions are also presented for laminar and turbulent flow conditions.</description><subject>Applied sciences</subject><subject>Direct energy conversion and energy accumulation</subject><subject>Electrical engineering. Electrical power engineering</subject><subject>Electrical power engineering</subject><subject>Energy</subject><subject>Energy. Thermal use of fuels</subject><subject>Exact sciences and technology</subject><subject>Heat transfer</subject><subject>Miscellaneous</subject><subject>Natural energy</subject><subject>Photoelectric conversion</subject><subject>Photovoltaic conversion</subject><subject>Solar cells. Photoelectrochemical cells</subject><subject>Solar energy</subject><subject>Theoretical studies. Data and constants. Metering</subject><issn>0199-6231</issn><issn>1528-8986</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2011</creationdate><recordtype>article</recordtype><recordid>eNo9kD1PwzAURS0EEqUwMLN4YWBI6-eP1BkhAlqpEkiUhSV6dezWVZpUtlup_56gVkx3Offp3UPIPbARAKgxjCRjAqS6IANQXGe60PklGTAoiiznAq7JTYwbxkAIxQfkp-zagzXJHyydWkx0EbCNzgZadtY5b7xtU6S-pUhf9r6pfbvKZm2yq4DJ1vRz3aXu0DUJvRkv1jZssaFfx5js9pZcOWyivTvnkHy_vS7KaTb_eJ-Vz_MMBWcp40ujlrr_TCnuOBgUhQTNjUbhQHClHWeFYNLmhiM4g0bICTIti7yuAbUYkqfTXRO6GIN11S74LYZjBaz6k1JBdZbSs48ndofRYOP6scbH_wKXvZZcTnru4cRh3Npq0-1D20-opNAsB_ELY0ppqQ</recordid><startdate>20110501</startdate><enddate>20110501</enddate><creator>Candanedo, Luis M</creator><creator>Athienitis, Andreas</creator><creator>Park, Kwang-Wook</creator><general>ASME</general><general>American Society of Mechanical Engineers</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>20110501</creationdate><title>Convective Heat Transfer Coefficients in a Building-Integrated Photovoltaic/Thermal System</title><author>Candanedo, Luis M ; Athienitis, Andreas ; Park, Kwang-Wook</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-a320t-2bc5b8231552f21ca394182c8a3f13258f209304e6c2a1fcac347a08496dd1a83</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2011</creationdate><topic>Applied sciences</topic><topic>Direct energy conversion and energy accumulation</topic><topic>Electrical engineering. Electrical power engineering</topic><topic>Electrical power engineering</topic><topic>Energy</topic><topic>Energy. Thermal use of fuels</topic><topic>Exact sciences and technology</topic><topic>Heat transfer</topic><topic>Miscellaneous</topic><topic>Natural energy</topic><topic>Photoelectric conversion</topic><topic>Photovoltaic conversion</topic><topic>Solar cells. Photoelectrochemical cells</topic><topic>Solar energy</topic><topic>Theoretical studies. Data and constants. Metering</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Candanedo, Luis M</creatorcontrib><creatorcontrib>Athienitis, Andreas</creatorcontrib><creatorcontrib>Park, Kwang-Wook</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><jtitle>Journal of solar energy engineering</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Candanedo, Luis M</au><au>Athienitis, Andreas</au><au>Park, Kwang-Wook</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Convective Heat Transfer Coefficients in a Building-Integrated Photovoltaic/Thermal System</atitle><jtitle>Journal of solar energy engineering</jtitle><stitle>J. Sol. Energy Eng</stitle><date>2011-05-01</date><risdate>2011</risdate><volume>133</volume><issue>2</issue><issn>0199-6231</issn><eissn>1528-8986</eissn><coden>JSEEDO</coden><abstract>This paper presents an experimental study for the development of convective heat transfer correlations for an open loop air-based building-integrated photovoltaic/thermal (BIPV/T) system. The BIPV/T system absorbs solar energy on the top surface, which includes the photovoltaic panels and generates electricity while also heating air drawn by a variable speed fan through a channel formed by the top roof surface with the photovoltaic modules and an insulated attic layer. The BIPV/T system channel has a length/hydraulic diameter ratio of 38, which is representative of a BIPV/T roof system for 30–45 deg tilt angles. Because of the heating asymmetry in the BIPV/T channel, two average Nusselt number correlations are reported as a function of Reynolds number: one for the top heated surface and the other for the bottom surface. For the top heated surface, the Nusselt number is in the range of 6–48 for Reynolds numbers ranging from 250 to 7500. For the bottom insulated surface, the Nusselt number is in the range of 22–68 for Reynolds numbers ranging from 800 to 7060. This paper presents correlations for the average Nusselt number as a function of Reynolds number; this correlation is considered adequate for the design of BIPV/T systems where forced convection dominates. Local Nusselt number distributions are also presented for laminar and turbulent flow conditions.</abstract><cop>New York, NY</cop><pub>ASME</pub><doi>10.1115/1.4003145</doi></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0199-6231 |
ispartof | Journal of solar energy engineering, 2011-05, Vol.133 (2) |
issn | 0199-6231 1528-8986 |
language | eng |
recordid | cdi_crossref_primary_10_1115_1_4003145 |
source | ASME Transactions Journals |
subjects | Applied sciences Direct energy conversion and energy accumulation Electrical engineering. Electrical power engineering Electrical power engineering Energy Energy. Thermal use of fuels Exact sciences and technology Heat transfer Miscellaneous Natural energy Photoelectric conversion Photovoltaic conversion Solar cells. Photoelectrochemical cells Solar energy Theoretical studies. Data and constants. Metering |
title | Convective Heat Transfer Coefficients in a Building-Integrated Photovoltaic/Thermal System |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-17T18%3A51%3A10IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-asme_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Convective%20Heat%20Transfer%20Coefficients%20in%20a%20Building-Integrated%20Photovoltaic/Thermal%20System&rft.jtitle=Journal%20of%20solar%20energy%20engineering&rft.au=Candanedo,%20Luis%20M&rft.date=2011-05-01&rft.volume=133&rft.issue=2&rft.issn=0199-6231&rft.eissn=1528-8986&rft.coden=JSEEDO&rft_id=info:doi/10.1115/1.4003145&rft_dat=%3Casme_cross%3E438061%3C/asme_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |