Effect of the (Ba + Sr)/Ti ratio on the microwave‐tunable properties of Ba 0.6 Sr 0.4 TiO 3 ceramics

The impact of the (Ba + Sr)/Ti (A/B) ratio on the microwave‐tunable characteristics of diffuse phase transition ( DPT ) ferroelectric Ba 0.6 Sr 0.4 TiO 3 (0.6‐ BST ) ceramics was investigated. The reduction in the lattice constant with increasing nonstoichiometry was attributed to introduced partial Schottky defects, i.e., and . The magnitude of the dielectric constant, ε′, at room temperature in the absence of an applied electric field was governed by the shift in the dielectric maximum temperature, T m , because T m was close to room temperature for the 0.6‐ BST . The dielectric loss, tanδ, diminished as the ε′ decreased for 0.98≤A/B≤1.05, while the tanδ was much higher for A/B=0.95 having the greatest A‐site vacancy loading. The negatively charged and were mainly compensated by oxygen vacancies and likely partly compensated by holes, h • , which contributed to the electrical conduction. The tunability, T , at 100 MHz was almost constant at 20%–25% for A/B≥1.00 despite the reduction of the ε′, whereas T decreased for A/B