Fermilab Energy Doubler Beam Position Detector

Fermilab Energy Doubler Beam Position Detector

This paper describes the design and performance of the beam position detector being installed in the Fermilab superconducting Energy Doubler accelerator. The detector is a stripline pickup designed to operate at 4 degrees Kelvin and with beam intensities ranging from 108 to 1011 protons per RF bucke...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on nuclear science 1981-01, Vol.28 (3), p.2290-2292
Hauptverfasser: Shafer, R. E., Webber, R. C., Nicol, T. H.
Format: Artikel
Sprache:eng
Schlagworte:
Coaxial cables
Connectors
Detectors
Electrodes
Impedance
Particle beams
Proton accelerators
Stripline
Superconducting cables
Temperature
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper describes the design and performance of the beam position detector being installed in the Fermilab superconducting Energy Doubler accelerator. The detector is a stripline pickup designed to operate at 4 degrees Kelvin and with beam intensities ranging from 108 to 1011 protons per RF bucket at 53 MHz. The detector design, signal amplitude, positional sensitivity, directivity, and longitudinal impedance are presented.
ISSN:0018-9499
1558-1578
DOI:10.1109/TNS.1981.4331666