Control of IMD Asymmetry of CMOS Power Amplifier for Broadband Operation Using Wideband Signal
A fully integrated linear CMOS power amplifier (PA) for the broadband operation is developed for handset applications. This amplifier can handle a wideband signal. To achieve broadband/wideband operation, an analysis of the intermodulation distortion for the asymmetric source in a differential casco...
Gespeichert in:
Veröffentlicht in: | IEEE transactions on microwave theory and techniques 2013-10, Vol.61 (10), p.3753-3762 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | A fully integrated linear CMOS power amplifier (PA) for the broadband operation is developed for handset applications. This amplifier can handle a wideband signal. To achieve broadband/wideband operation, an analysis of the intermodulation distortion for the asymmetric source in a differential cascode structure is presented. Based on the analysis, the linearization technique using a second harmonic circuit at the gate of the common gate is proposed to reduce the asymmetry. The proposed PA with an on-chip transmission-line transformer, which has a broadband matching characteristic, is fabricated using a 0.18-μm RF CMOS technology. The measurement results show that the sideband asymmetry is less than 0.6 dB for a signal with up to 50-MHz bandwidth, and the peak average power is improved by 1.2 dB within the linearity spec of a 16-QAM 7.5-dB peak-to-average power ratio long-term evolution signal. The PA delivers a power-added efficiency of 36.5%-31.2% and an average output power of 27.5-27.1 dBm under an ACLR E-UTRA of -30.5 dBc for a 50-MHz bandwidth signal across 1.4-2.0-GHz carrier frequency. |
---|---|
ISSN: | 0018-9480 1557-9670 |
DOI: | 10.1109/TMTT.2013.2280116 |