A Novel Adaptive Digital Beamforming Method Based on Beam-Space Phase-Center Cross-Correlation

Digital beamforming (DBF) can provide high-gain narrow-beam scanning reception while transmitting wide-beam signals, which greatly improves the signal-to-noise ratio (SNR) of the corresponding systems. It is an effective technique for synthetic aperture radar (SAR) to obtain high-resolution wide-swath (HRWS) imaging capability. However, elevation changes in mountain area will lead to beam-pointing mismatch problems when using the ideal sphere model to calculate the beamforming weighting vector. As a result, the loss of receive gain and the deterioration of the SNR will occur. To solve this problem, adaptive digital beamforming (ADBF) methods based on spectral estimation are typically used, such as Capon and MUSIC. However, the computational complexity of spectral estimation method is high, which is not conducive to on-satellite real-time processing. Therefore, a low complexity ADBF method based on beam-space phase-center cross-correlation is proposed. In this method, the whole array is divided into several subarrays, and multiple phase centers are formed by beamforming so that the angle of arrival (AOA) of the signal source can be accurately estimated. Then, the weighted vector of the received beam is updated to mitigate the loss of receiver gain. The simulation results and airborne measured data validate the effectiveness of the proposed method. Compared with methods based on Capon and MUSIC, the proposed method can decrease the computational complexity without reducing the processing accuracy, thus providing a basis for the real-time processing of spaceborne DBF-SAR signals in the future.