A Simple Sensorless Position Error Correction Method for Dual Three-Phase Permanent Magnet Synchronous Machines
In this article, a simple position error correction method is proposed to minimize the influence of parameter deviation on the model-based rotor position estimation, with the help of two sets of windings in a dual 3-phase permanent magnet synchronous machine (PMSM). In the proposed method, when each...
Gespeichert in:
Veröffentlicht in: | IEEE transactions on energy conversion 2021-06, Vol.36 (2), p.895-906 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | In this article, a simple position error correction method is proposed to minimize the influence of parameter deviation on the model-based rotor position estimation, with the help of two sets of windings in a dual 3-phase permanent magnet synchronous machine (PMSM). In the proposed method, when each set of 3-phase windings is individually used for sensorless rotor position estimation, the nominal parameters that are set in each observer are identical but inaccurate, which leads to errors in the estimated rotor position from both observers. Since the error is varied according to the current level, small current pulses are injected respectively into d - or q -axis of one set (or both set) of 3-phase windings, which causes the difference between the rotor position estimation errors from two sets of 3-phase windings. This difference is subsequently used as the input of an updated controller to minimize the parameter deviation and the corresponding rotor position error. The proposed method is experimentally validated on a dual 3-phase PMSM system. |
---|---|
ISSN: | 0885-8969 1558-0059 |
DOI: | 10.1109/TEC.2020.3023904 |