Sliding-Mode-Based Direct Power Control of Grid-Connected Wind-Turbine-Driven Doubly Fed Induction Generators Under Unbalanced Grid Voltage Conditions

This paper proposes an improved direct power control (DPC) strategy of grid-connected wind-turbine-driven doubly fed induction generators (DFIGs) when the grid voltage is unbalanced. The DPC scheme is based on the sliding mode control (SMC) approach, which directly regulates the instantaneous active...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on energy conversion 2012-06, Vol.27 (2), p.362-373
Hauptverfasser: Shang, Lei, Hu, Jiabing
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper proposes an improved direct power control (DPC) strategy of grid-connected wind-turbine-driven doubly fed induction generators (DFIGs) when the grid voltage is unbalanced. The DPC scheme is based on the sliding mode control (SMC) approach, which directly regulates the instantaneous active and reactive powers in the stator stationary reference frame without the requirement of either synchronous coordinate transformation or phase angle tracking of grid voltage. The behavior of DFIGs by the conventional SMC-DPC, which takes no negative-sequence voltage into consideration, is analyzed under unbalanced grid voltage conditions. A novel power compensation method is proposed for the SMC-based DPC during network unbalance to achieve three selective control targets, i.e., obtaining sinusoidal and symmetrical stator current, removing stator interchanging reactive power ripples and canceling stator output active power oscillations, respectively. The active and reactive power compensation components are calculated via a simple method and the proposed three control targets can be achieved, respectively, without the need of extracting negative-sequence stator current components. Experimental results on a 2 kW DFIG prototype are presented to verify the correctness and validity of the proposed control strategy and power compensation method.
ISSN:0885-8969
1558-0059
DOI:10.1109/TEC.2011.2180389