A Dividerless Ring Oscillator PLL With 250fs Integrated Jitter Using Sampled Lowpass Filter
This brief presents a novel ring oscillator based phase lock loop architecture that is capable of wideband, dividerless integer-N synthesis. The noise transfer function of the presented architecture is the same as a sub-sampling phase lock loop (PLL). Like a sub-sampling PLL, the presented architect...
Gespeichert in:
Veröffentlicht in: | IEEE transactions on circuits and systems. II, Express briefs Express briefs, 2020-11, Vol.67 (11), p.2337-2341 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | This brief presents a novel ring oscillator based phase lock loop architecture that is capable of wideband, dividerless integer-N synthesis. The noise transfer function of the presented architecture is the same as a sub-sampling phase lock loop (PLL). Like a sub-sampling PLL, the presented architecture removes the phase detector and charge pump's N 2 noise that dominates the in-band noise of traditional PLLs. This noise reduction allows the presented ring oscillator PLL to operate with integrated jitter as low as 250fs. Unlike sub-sampling PLLs, the presented architecture moves the sampling block downstream of the loop filter. As the sampled data is lowpass filtered, only low frequency sampling blocks are required, which removes the power and area overheads associated with directly sampling the voltage controlled oscillator. Measurement results show the presented PLL is capable of locking over a wide range of 1.2-2.5GHz. The presented PLL is fabricated in 65nm bulk CMOS, and demonstrates a figure of merit of -242.7dB, which is among best in class for ring oscillator PLLs. Furthermore, an area of 0.0066 mm 2 is consumed, which represents the smallest published sub-sampling ring oscillator PLLs. |
---|---|
ISSN: | 1549-7747 1558-3791 |
DOI: | 10.1109/TCSII.2020.2977025 |