Distributed Antennas for Indoor Radio Communications

The idea of implementing an indoor radio communications system serving an entire building from a single central antenna appears to be an attractive proposition. However, based on various indoor propagation measurements of the signal attenuation and the multipath delay spread, such a centralized appr...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on communications 1987-12, Vol.35 (12), p.1245-1251
Hauptverfasser: Saleh, A.A.M., Rustako, A., Roman, R.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The idea of implementing an indoor radio communications system serving an entire building from a single central antenna appears to be an attractive proposition. However, based on various indoor propagation measurements of the signal attenuation and the multipath delay spread, such a centralized approach appears to be limited to small buildings and to narrow-band FDMA-type systems with limited reliability and flexibility. In this paper, we present the results of indoor radio propagation measurements of two signal distribution approaches that improve the picture dramatically. In the first, the building is divided into many small cells, each served from an antenna located in its own center, and with adjacent cells operating in different frequency bands. In the second approach, the building is divided into one or more large cells, each served from a distributed antenna system or a "leaky feeder" that winds its way through the hallways. This approach eliminates the frequency cell handoff problem that is bound to exist in the first approach, while still preserving the dramatic reductions in multipath delay spread and signal attenuation compared to a centralized system. For example, the measurements show that, with either approach, the signal attenuation can be reduced by as much as a few tens of decibels and the rms delay spread becomes limited to 20 to 50 us, even in large buildings. This can make possible the implementation of sophisticated broad-band TDMA-type systems that are flexible, robust, and virtually building-independent.
ISSN:0090-6778
1558-0857
DOI:10.1109/TCOM.1987.1096716