A Low-Profile Coplanar Dual-Polarized and Dual-Band Base Station Antenna Array

This paper presents a low-profile coplanar dual-polarized dual-band base station antenna array. A slotted patch antenna operating from 0.82 to 0.99 GHz with four shorting strips is proposed and analyzed. The four shorting strips are employed not only to improve the impedance matching in the lower ba...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on antennas and propagation 2018-12, Vol.66 (12), p.6921-6929
Hauptverfasser: Nie, Li Ying, Lin, Xian Qi, Chen, Yi Jun, Zhang, Jin, Wang, Bao, Yang, Zi Qiang, Fan, Yong
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper presents a low-profile coplanar dual-polarized dual-band base station antenna array. A slotted patch antenna operating from 0.82 to 0.99 GHz with four shorting strips is proposed and analyzed. The four shorting strips are employed not only to improve the impedance matching in the lower band but also to remove the center part of the patch, thus making room for higher band dipoles operating from 1.68 to 2.86 GHz. The height of the proposed array is nearly half of the conventional base station array while other performances are guaranteed. The measured results show that the proposed antenna array has wide impedance bandwidths of 18.7% (0.82-0.99 GHz) and 57.9% (1.68-2.86 GHz) (VSWR < 2) with a low profile ( 0.109\lambda _{0} at 820 MHz). The measured gains are 13.8±0.5 dB and 16.7 ± 1 dB in lower and upper bands. Large front-to-back ratio (>24.6 dB) and high isolations (>30 and >25 dB in lower and upper bands, respectively) are achieved. The proposed antenna can be easily built with printed circuit board fabrication technique and applied in low profile multiband base stations for 2G/3G/4G and the next-generation systems.
ISSN:0018-926X
1558-2221
DOI:10.1109/TAP.2018.2869222