Pipe-line design for pipe-type feeders

Pipe-line design for pipe-type feeders

AN ECONOMIC DESIGN of pipe-type feeder has as small a pipe and as long a section as good engineering permits. Minimum pipe size must be large enough to insure that the top conductor, when in triangular formation, will not press against the pipe. If a clearance of 0.25 inch is calculated, using a con...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Electrical engineering (New York, N.Y.) N.Y.), 1954-03, Vol.73 (3), p.213-213
1. Verfasser: Rifenburg, R. C.
Format: Artikel
Sprache:eng
Schlagworte:
Cable insulation
Conductors
Equations
Foot
Friction
Mathematical model
Presses
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:AN ECONOMIC DESIGN of pipe-type feeder has as small a pipe and as long a section as good engineering permits. Minimum pipe size must be large enough to insure that the top conductor, when in triangular formation, will not press against the pipe. If a clearance of 0.25 inch is calculated, using a conductor size with maximum tolerance, it is assumed that clearance is assured.
ISSN:0095-9197
2376-7804
DOI:10.1109/EE.1954.6439290