Magnetic Equivalent Circuit Model for Performance Prediction of Two-DOF Planar Resolver

In this paper, an analytical model based on the Magnetic Equivalent Circuit (MEC) method is developed for a planar wound mover two-degree of freedom (2-DOF) resolver. Planar resolvers enable mass, volume, and complexity reductions for position control of 2-DOF linear actuators. However, similar to a...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE access 2023, Vol.11, p.102207-102216
Hauptverfasser: Zare, Fateme, Tootoonchian, Farid, Daniar, Ahmad, Gardner, Matthew C., Akin, Bilal
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In this paper, an analytical model based on the Magnetic Equivalent Circuit (MEC) method is developed for a planar wound mover two-degree of freedom (2-DOF) resolver. Planar resolvers enable mass, volume, and complexity reductions for position control of 2-DOF linear actuators. However, similar to any other linear electromagnetic sensors, the performance of the planar resolvers is negatively affected by the limited dimensions of the mover's ferromagnetic core. Thus, it is necessary to develop an appropriate compensation method. On the other hand, the 3-D geometry of the sensor necessitates extremely time consuming 3-D time-stepping analysis. Therefore, a fast yet accurate analytical model is critical for the iterative design and compensation algorithm. In order to address these modeling limitations, the slot-tooth region and longitudinal end effect are included in the model. Then, its accuracy is verified by comparing the results with those of the 3-D time stepping finite element method (TSFEM). Then, the developed model is employed for design optimization to compensate for the end effects. Finally, the optimal sensor is experimentally prototyped and tested.
ISSN:2169-3536
2169-3536
DOI:10.1109/ACCESS.2023.3315344