A new ductile, tougher resin for impregnation of superconducting magnets
A major remaining challenge for Nb 3 Sn high field magnets is their training due to random temperature variations in the coils. The main objective of our research is to reduce or eliminate it by finding novel impregnation materials in replacement of the epoxies currently used. An organic olefin-base...
Gespeichert in:
Veröffentlicht in: | Superconductor science & technology 2024-04, Vol.37 (4), p.45008 |
---|---|
Hauptverfasser: | , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | A major remaining challenge for Nb
3
Sn high field magnets is their training due to random temperature variations in the coils. The main objective of our research is to reduce or eliminate it by finding novel impregnation materials in replacement of the epoxies currently used. An organic olefin-based thermosetting dicyclopentadiene resin, C
10
H
12
, commercially available in Japan as TELENE
®
by RIMTEC, was used to impregnate a short Nb
3
Sn undulator coil developed by ANL and FNAL. This magnet reached short sample limit after only two quenches, compared with ∼100 when CTD-101K
®
was used. Ductility, i.e. the ability to accept large strains, and toughness were identified as key properties to achieve these results. In addition, we have been investigating whether mixing TELENE with high heat capacity ceramic powders such as Gd
2
O
3
, Gd
2
O
2
S, and HoCu
2
, increases the specific heat (
C
p
) of impregnated Nb
3
Sn superconducting magnets. The viscosity, heat capacity, thermal conductivity, and other physical properties of TELENE with high-
C
p
powder fillers were measured in this study as a function of temperature and magnetic field. The TELENE-87 wt%Gd
2
O
2
S had a peak in
C
p
between 4.3 K and 5.3 K at fields between 0 and 8 T. We have also investigated the effect on the mechanical properties of pure and mixed TELENE under 10 MGy of gamma ray irradiation at the Takasaki Advanced Radiation Research Institute in Takasaki, Japan. TELENE-87 wt%Gd
2
O
2
S exhibited exceptional radiation resistance. Impregnating an undulator coil with TELENE mixed with Gd
2
O
2
S powder will verify whether the coils’ thermal stability further improves, or whether its low diffusivity will require engineering the material with high-thermal conductivity components. Short magnet training will lead to better magnet reliability, lower magnet margins, lower risk and substantial saving in accelerators’ commissioning costs. Part of this study is supported by the U.S.-Japan Science and Technology Cooperation Program in high energy physics operated by MEXT in Japan and DOE in the U.S. |
---|---|
ISSN: | 0953-2048 1361-6668 |
DOI: | 10.1088/1361-6668/ad2c25 |