Characterization of identical lithium-ion battery electrodes before and after charge/discharge cycles via in-plane large-area polishing

As an effective method to fabricate a large-area cross-sectional sample for lithium-ion battery electrodes, we perform in-plane polishing of LiNi0.8Co0.15Al0.05O2 (NCA) cathode samples and obtain a large cross-sectional area with a diameter of 1.5 mm. The polished cross-sections of NCA cathode particles are sufficiently flat to perform the atomic force microscopy (AFM) measurements on each cathode particle. Following AFM-based Kelvin probe force microscopy and scanning spreading resistance microscopy measurements, an identical in-plane polished NCA sample is assembled into a coin cell for the charge and discharge processes. After 90 charge/discharge cycles, the in-plane-polished sample is successfully disassembled from the coin cell without causing critical damage. In addition, a microcrack structure, which is a typical degradation feature of the cycles of NCA particles, is observed for the identical in-plane polished NCA sample. This indicates that the in-plane polishing method is effective for investigating identical NCA electrode samples before and after the charge/discharge process. Furthermore, the in-plane polishing method can be successfully applied to the large-area polishing of a Si-based anode which is a mixture of Si carbon complexes and graphite particles. This study presents a novel methodology for analyzing the degradation of lithium-ion battery electrode materials.&#xD.