Particle behavior and trap design for ±320 kV gas-insulated power transmission line (GIL)

The movement of metal particles in the electric field of the DC gas-insulated transmission line (GIL) may cause local electric field distortion on the surface of the spacer, which seriously affects the operation stability of the GIL. In this paper, based on a ±320 kV GIL platform, the movement characteristics of metal particles (aluminum blocks, aluminum wires, aluminum balls) inside the GIL are studied. The suppression effect of particle activity for particle trapping and surface coating are experimentally studied in DC electric field. The relationship between particle trap porosity and particle suppression effect are discussed and verified with experiments. The research results show that under negative voltage, the minimum take-off voltage of metal particles in ±320 kV GIL is −190 kV, which is far lower than the steady-state operating voltage of GIL. Once the spherical and blocky particles take off, they will continue to reciprocate rapidly between the conductors. When the block particles are close to the spacer, they might be attracted and adsorbed on the surface of the spacer. Metal wires after taking off tend to show ‘firefly’ movement near the high-voltage conductor. The coating has a significant effect on increasing the take-off electric field of metal particles. It is verified that the traditional AC GIL particle trap is not effective in inhibiting particles in DC voltage. The suppression of the DC GIL particle is positively related to the porosity of the particle trap to a certain extent. The conclusions of this paper can be reference for the development of future stable and reliable DC gas-insulated equipment.