A high transmittance and fast response in-plane switching liquid crystal display with the zero-azimuth anchoring layers on the electrodes

An in-plane switching (IPS) liquid crystal display (LCD) containing the zero-azimuth anchoring layers formed only on the electrodes and rubbed polyimide (PI) covered on the other areas was successfully developed. This configuration was realized using photoreactive PI with photo-radical generation units and the mask exposure technique. The maximum transmittance ( T max ) of this LCD was 1.12 times higher than that of a conventional IPS LCD. This was attributed to a large aperture in the voltage-on state because the nematic liquid crystals (NLCs) on the electrodes were barely anchored to the surface, such that the NLCs could be rotated by applying a small in-plane electric field above the electrodes, and by an elastic torque caused by the twisted NLCs between the electrodes. Furthermore, the response times of this LCD were equivalent to those of a conventional IPS LCD because the NLCs between the electrodes quickly recovered to their initial orientation after removing the electric field, and the NLCs on the electrodes followed this movement. This novel LCD is termed a ‘partially zero-azimuth anchoring IPS (PZ-IPS) LCD’, which is the first practical LCD utilizing these weak anchoring characteristics in the history of LCDs.