The role of surface roughness and slide-roll ratio on the decomposition of MoDTC in tribological contacts

In this study, the role of surface roughness and slide-roll ratio in the decomposition and friction performance of molybdenum dialkyldithiocarbamate (MoDTC) has been investigated. Tribotests were carried out in a minitraction machine (MTM) using steel discs of varying roughness rubbing against smooth steel balls in a sliding/rolling contact. Tests were conducted at slide-roll ratio (SRR) values of SRR = 100% and 200%. Raman spectroscopy was used to perform chemical characterisation on the resulting wear scars. The friction performance of rough discs was not affected by the SRR. On the other hand, increasing the SRR from 100% to 200% in tests with smooth discs resulted in higher friction with large instabilities. Raman analysis showed significant differences in chemical composition of the wear scars generated after tests with smooth and rough discs. Wear scars generated using rough discs were mainly composed of MoS2 indicating complete MoDTC decomposition while those generated using smooth discs were composed of a mixture of MoS2, MoSx (x > 2) and FeMoO4 indicating partial MoDTC decomposition. Numerical simulation of the contact revealed that under similar loading conditions rough surfaces have higher local pressures than smoother surfaces. It is proposed that higher local pressures in rough surfaces promoted complete MoDTC decomposition. The novel finding from results presented in this study is that at similar temperature and MoDTC concentration, the degradation of MoDTC within tribocontacts is highly dependent on the roughness of the tribopair. This is because surface roughness determines the local pressure at the asperity-asperity contact.