Modulation of silica layer properties by varying the granulometric state of tetraethyl orthosilicate precursor aerosols during combustion chemical vapor deposition (CCVD)

For the purpose of silica surface layer modulation, a pneumatic-controlled two-substance atomizer with inertia-based coarse droplet separation was operated at different system pressures for tetraethyl orthosilicate precursor aerosol supply during combustion chemical vapor deposition. A comprehensive testing study was performed to characterize the atomizer's performance characteristics, initial precursor aerosols at the atomizer's outlet, transformed aerosols before combustion, combustion aerosols and formed layers. Laser diffraction spectrometry, differential electrical mobility analyses and condensation particle counting were used for aerosol characterization with regard to particle size and particle production quantities. Layers were characterized by scanning electron microscopy, atomic force microscopy, spectral ellipsometry, water contact angle measurements and light transmission concerning geometric properties (thickness, surface structure and roughness) and physical behaviors (i.e., optical behaviors, hydrophobicity). Results show a quasi-linear relationship of the ejection mass flow of the pneumatic-controlled atomizer and geometric layer properties which again show a direct relationship to the physical properties. No correlation was found between the aerosols before combustion and the combustion aerosols since the majority of combustion aerosol particles are synthesized solely from the gas phase based on evaporated precursor material. Copyright © 2020 American Association for Aerosol Research